EATON SCANTRONIC I-ON30R PANEL

EATON - SCANTRONIC 30 ZONE RADIO CONTROL PANEL - I-ON30R

CODE: I-ON30R

£134.99

Out-of-stock

Description

30 zones on-board expandable to 60
• Hybrid expansion using EXP-R10/R30/W10/PSU
• Ethernet/ web server/ virtual keypad
• Visual verification
• Perimeter zone functionality
• SMS control
• Plug on ARC/ Speech/ SMS for PSTN/ GSM
• Class leading Scantronic radio
• UDL/ ARD over IP or PSTN
• EN50131 Grade II: Independently approved

Product Description

The i-on30R, a 30 zone radio panel offers
straightforward secure configuration
using the enhanced web browser and is
compatible with Eaton’s full range of radio
peripherals and plug on communicators.

Feature packed to deliver you real benefits.
Highly secure encrypted web browser: mobile and tablet
friendly interface for easy on-site system configuration
Email notification: Provides detailed system event
information and image verification, when alarm is activated
SIA over IP: IP communication to your ARC with no
requirement for a PSTN line, removing call charges and line
fees
Easy updates
Panel software updatable: provides choice of easy firmware
update methods using Ethernet, USB and SD card

Product Specification

Compliance EN50131-1:2006 + A1:2009 Grade 2 and environmental class II, EN50131-3:2009, EN50131-6:2008,
BS8243:2010, PD6662:2010 + IA1501:2015
Zones 30 Radio on board, expandable to 60, all fully programmable
Partitions 4 independent partitions each with a part set or full set and three part set
Users 30 user codes, 4 digit PIN number, proximity, remote control or radio panic button
Event log 1000 events; 750 mandatory events and 250 non-mandatory
Outputs One 500mA open collector programmable outputs
10 radio outputs
Bus devices Accepts up to 20 bus devices (keypads, expanders and power supplies)
Internal sounder One independently controlled 16 Ω speaker
4 internal radio sounders
External Sirens Dedicatated Siren and Strobe open collector output
4 External Radio Sirens
Remote communications SIA IP via built in Ethernet port
Email and images via via built in Ethernet port
Footprint for connection of a range of alarm communications modules as described below
Visual Verification Up to 4 IP cameras
Power supply Conforms to EN50131-6:2008 Type A power supply, rated power output 1.0A. 650mA is available for
auxiliary power
Configurations options Downloader via USB, IP or plug-on comms module, web browser via built in Ethernet port
Battery Accepts a 12v standby battery up to 7Ah rechargeable lead acid, gel type
Dimensions End station: 384 x 245 x 94mm
Weight End station: 2.2kg
Temperature range Environmental class II. Tested -10°C to 55°C @ 93% RH

 

 

 

Cameras

N
N
N

Type the characters you see in the picture above.

Loading...