Cart is empty
Product Description
The ESP Wireless transmitter/ reciever kit allows the transmission if one video signal unto 150 Metres line of sight.
EZ-WF - Wirefree/Wireless Video Signal Transmitter for Wirefree CCTV Camera Installation
Utilising two wirefree video signal links to send wireless transmissions to a range of over 150m from up to four units.
Saving on installation costs and eliminates expensive or troublesome cable runs.
The transmitter and receivers are factory paired for easy set up and will transmit audio and video.
The housings are IP66 rated.
EZ-WF is designed to create a wire free link for a single camera however up to four EZ-WF units can be installed in close proximity without interference.
To gain maximum range capability the transmitter and receiver units should be mounted within direct
line of site of each other.
Both transmitter and receiver are IP66 rated and therefore suitable for external use however all wired connections should be made in a separate IP rated waterproof enclosure.
EZ-WF Specification:
• 150m Range (open field)
• Stable digital transmission
• FCC approved
• Pre-coded pairing
• Up to 4 units in single location
• IP66 rated housings
• Wired output available on transmitter
Technical specification - System
Transmission channels: 80 channels, auto selected
Video bit rate: Up to 12Mbps
ID codes: Up to 4 Million
Video resolution: 720 x 480 @ 30fps
Operational range: 150m open field
Technical specification - TX Transmitter module
Operating frequency: 2.4000 GHz – 2.4835 GHz
Transmit power: 100 Mw (MAXIMUM)
Modulation: 16 QAM / QPSK / BPSK
Video input: level 1 ± 0.2 Vp-p @ 75 Ω
Audio input: level 1 ± 0.2 Vp-p @ 600 Ω
Antenna: Omnidirectional
Power consumption: 1.9 W
Power adapter: 12 VDC / 1A
Dimensions: (W x D x H) 159.5mm x 136.4mm x 34.8mm (without antenna and drop cable)
Weight: 19 oz (538 g)
Technical specification - RX Receiver module
Operating frequency: 2.4000 GHz – 2.4835 GHz
Receiver sensitivity: -85 dbm minimum
Video output level: 1 ± 0.2 Vp-p @ 75 Ω
Audio output level: 1 ± 0.2 Vp-p @ 600 Ω
Antenna: Omnidirectional
Power consumption: 1.9 W
Power adapter: 12 VDC / 1A
Dimensions: (W x D x H) 159.5mm x 136.4mm x 34.8mm (without antenna and drop cable)
Weight: 19 oz (538 g)
Contents
1x TX Transmitter module
1x RX Receiver module
2x 12 VDC power adapter
2x Antenna
1x User manual
USES of Wireless Video Sender
- Used mainly with calving cameras, where signal needs to be sent from a remote farm shed from CCTV cameras to main house
- Used also in industrial and commerical situations for monitoring warehouses, units and work areas not wired direclty to the main monitoring area
- Used in conjunction with cameras, DVR recorders & multiplexers
ADVANATAGES of Wireless Video Sender
- Has a huge range of up to 1.5km, which meets nearly all requirements
- Saves on the hassle and expensive of having to run cable
- Due to using the 5.8GHz range, there is virtually none of the interference problems which occur with the 2.4GHz range
- All you need is power - no need for a broadband connection
- It comes at a very competitive price
- It is the most reliable brand name on the market
DISADVANATAGES of Wireless Video Sender
- It needs line of sight to work well
- It can only broadcast a single DVR or camera output at a time
- More expensive than the old style 2.4GHz units
Cameras
There are currently no reviews for this product.
