POWERMASTER WIRELESS SMOKE & HEAT DETECTOR - SMD-427

CODE: SMD-427

£66.30

In stock

Description

PowerMaster Wireless Smoke & Heat Detector

Product Description

SMD-427 PG2 is a fully supervised wireless photoelectric smoke & heat detector that is compatible with PowerMaster® wireless alarm systems.
By sensing rapid temperature changes in areas where they may occur, such as kitchens or attics, SMD-427 PG2 activates an alarm when temperatures reach 50°C (122°F) and start increasing rapidly.

Activates an alarm when temperature reaches 50°C (122°F) and starts increasing rapidly
PowerG two-way Frequency Hopping Spread Spectrum FHSS-TDMA technology - provides robustness and reliability closer than ever to wired
Battery life 5-8 years with typical use, according to battery type
Provides sound and transmitted alerts (for smoke, tamper, low battery)
Loud (85db) alarm sound at 3m (10ft)
Large transmission range enabling repeater-free installations
Visible link quality indication shown on the device
Simple wall or ceiling installation, with bracket
Back tamper
Fully certified by the most strict international standards such as EN 14604 and EN 54-7 for safety products in Europe, and designed to comply with UL 268 in the USA

Specification

Battery type: 3V, CR123A / CR17450 Lithium battery
Weight (including battery): 165g (5.8oz)
Operating temperature: -10°C to 50°C (14°F to 122°F)
Operating environment: Indoor
Dimensions: 120 x 63mm (4.7 x 2.5in)

Please note:
This item works with UK Visonic products only. It is not compatible with EU Visonic products.
PowerMaster and PowerG panels and accessories are NOT compatible with PowerMax panels and accessories.

 

 

 

 

 

Cameras

There are currently no reviews for this product.

Type the characters you see in the picture above.

Loading...