Cart is empty
Part number: BBA-2500
Product Description
A driveway alarm can be that extra layer of home security that you need! For those of you who already have an alarm system in place, a driveway alarm protects the perimeter of your home and will instantly warn you of unwanted intruders. It can be useful for reasons beyond security too, as the driveway alarm can also give you that extra time to greet an approaching guest or to answer the door. Dakota is a long standing manufacturer of external alarms system and based in the USA.
BBT-2500 Sensors
The BBT-2500 is a solar powered wireless infrared break beam sensor that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries (included) that are recharged through the solar panels during the day. Because the unit is self powered there is no need to run wires for power. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 90 metres apart and sends a signal back to the DCR-2500 receiver up to half mile away anytime someone passes between the sensors.
The break beam sensor is a point to point sensor and is not activated by any motion outside of the monitored beam. The sensors are not affected by small objects such as falling leaves or birds. It can be mounted high enough to avoid dogs and other animals but it detects any intruder walking through the beam area. The beam sensor is ideal for outdoor applications such as storage yards, farms, car dealerships, etc. Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter.
DCR-2500 Receiver
The DCR-2500 is the receiver for the BBT-2500, DCMT-2500, DCPT-2500, and the DCHT-2500 systems. The receiver has four form “C” relay outputs and one 12VDC output. The output durations are adjustable up to 10 minutes. The receiver plays one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. The receiver also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.
Kit Includes:
1 x Receiver.
1 x 3-pin Transformer.
1 x Manual.
Beam Specification:
Size: 340 (H) x 123 (W) x 45 (D) mm.
Power Supply: Re-chargeable AA Batteries.
Mounting Methods: Wall or Pole.
Detection Range: 100 metres.
Transmission Range: 800 metres (line of sight).
Frequency: 433 Mhz.
IP Rating: IP66.
Distance Between Detection Beams: 60mm.
Low Battery Warning: Yes.
Receiver Specification:
Size: 150 (W) x 95 (H) x 35 (D) mm.
Power Supply: 12v DC.
Working Wireless Range: 800 metres (line of sight).
Volume Control: Yes (off to very high).
Channels: 4
Channel Audible Alerts: 4 (Classical, Westminster Chime, Ding Dong, Whistle).
Visual Alert: Yes (four LED Lights).
Output Relay Type: (N/O - COM - N/C).
Output Relays: 4
Output Relay Rating: 24v DC - 3amp.
12v Out Put: Yes (400mA max).
12v Output Duration: 1 second, 10 seconds, 60 seconds, 10 minutes.
12v Output Channels: 1 - 2 - 3 - 4 (selectable).
Delay Exit: 5 minutes (selectable for each channel).
Reminder Bleep: Yes (beeps every 15 minutes after an activation if required, selectable)
Cameras
There are currently no reviews for this product.
