1BSPIRK
1BSPIRK

EXTERNAL SOLAR PERIMETER BEAM & 15M SOLAR PIR ALERT KIT

CODE: 1BSPIRK

£459.98

In stock

Add a dialling module as required

ADD ADDITIONAL WIRELESS PIRS AS REQUIRED (£79.99ea)

ADD KEYFOBS IF REQUIRED £16.99ea

ADD EXTERNAL BELL AS REQUIRED (NOT SOLAR SIREN) £44.99

ADD WIRELESS SIGNAL BOOSTER AS REQUIRED £98.99ea

Description

Solar powered external perimeter detection and alert kit with 1x solar beams (notifies you of a crossed line, whether driveway, gateway, fence) and 2x external 15M range solar powered PIRs for external property protection and alert. 

Product Description

This kit features a pair of single set beams that have a 100m range (beam to beam) and a 900m (line of sight) transmission range. There are two additional PIRs that boast a 15m detection range, ideal for the protection of external buildings, doorways, yards and more.

The receiver will sound 'bing-bong' alerts whenever a beam or PIR is triggered, a loud siren or klaxon can be easily added to the receiver for much louder notifications and deterrents.

Remote keyfobs can be purchased and used with the receiver to arm and disarm the system quickly and conveniently without the use for keypads and pin numbers.

The kit is ideal for rural properties with the beams suitable for long roads and driveways onto properties. The wireless PIRs can be fitted anywhere within a 600m radius of the receiver. A repeater can be added to extend the signal up to 900m including obstructions.

A siren can be added to the receiver and the system can be armed / disarmed with the optional remote keyfob. The length of time that the additional siren sounds for can be determined by the DIP switches within the receive (1,5,10 minutes etc...) before it resets.

Kit Includes

1x pair of 100m range solar beams

2x 15M range external solar PIR detectors

1x Multi-channel / Multi-zone receiver

1x Bracket / mounting pack

1x Instruction set

Product Specifics


Receiver Specification
Size: 160 (W) x 105 (H) x 35 (D) mm
Power Supply: 15v DC 1amp (plug in transformer)
ON/OFF Button: Yes
Adjustable Volume Control: Yes
Channels: 4
Max sets of Beams per Channel: 32
Output Voltage: 12 - 12v DC
Output Voltage Duration: 2 seconds to 10 minutes
Built in Chimes: Yes (one per channel)
Reminder Bleep: Yes (if programmed)
Exit Delay: Yes 5 minutes (if programmed)
Frequency: 434.6 MHz
Standby Current: 20 mA
Alarm Current: 180 mA
Relay Rating: 24v DC or 120v AC (2 amp)

Beam Specification
Size: 340 (H) x 123 (W) x 45 (D) mm
Power Supply: Re-chargeable AA Batteries
Mounting Methods: Wall or Pole
Detection Range: 100 metres
Transmission Range: 900 metres (line of sight)


PIR Specification

Size: 100w x 90h x 140dmm
Detection range: 15m (can be reduced with three settings)
tramission range: 900m line of sight
brackets: Included
Power: Built in battery (charged via solar) additional AC adapter socket for charging in low sun situations


Cameras

N
N
N

Type the characters you see in the picture above.

Loading...