Cart is empty
Item Number: GJD600A
Product Description
Kit Includes:
- 2 x GJD910 Dygizone Lighting Controller (White or silver)
- 1 x GJD040 Expansion Unit
- 4 x GJD332 Mini Opal - External PIR Motion Sensor
GJD910C DygiZone Lighting Controller complete with GJD040 Expanion Unit:
GJD Dygizone Multifunction 4 Zone Controller complete with GJD040 4 zone expansion unit
A Dygizone control panel for the front and back doors, expansion unit and then 4 Opal XL PIRs to monitor the whole perimeter of the property. This can then be connected to a warning device of your choice, be that audible or visual.
Features:
- Precise 24 hour control and monitoring of 4 zones of security lighting via a user-friendly control panel and modern LCD display.
- Programmable functions that accurately control the activation, timing and duration of the lighting to minimise energy consumption and light pollution.
- Any one of 5 mode settings can be programmed for each zone.
- When the external GJD sensors are activated, the DygiZone indicates which Zone has been activated by either an audible beep or a 10 second pre-recordable voice message - and the Zone indicator is illuminated on the control panel.
- 2 programmable timers for each zone allows the lighting to be automatically switched on & off at pre-set periods for a pre-set time - ideal for when a building or premises are unoccupied.
- A system overide can be made from up to 3 locations at any time.
- The system can be expanded to enable up to a 30,000 Watts of lighting to be controlled and switched as required.
Specification:
| Supply | 12 VDC @ 20 mA standby. 100 mA triggered with message playback. |
| Display | Back lit blue LCD display showing real time clock, detector activation and zone status. |
| Audible | Internal warning tone. Individual tones for each zone or selectable 10 second voice recordable message for each zone. |
| Control | Four individual zone buttons for selecting zone status and programming options. |
| System configuration | Normally 1 Master and 1 Slave DygiZone. One additional Slave can be added if required. Requires GJD Expansion Units. |
| Time control | Two individual on/off timers per zone. |
| Mounting | Indoor use only. Mount in a clean dry location. Can be mounted on a standard single or double flush backbox. |
| Temperature | -10 to +55 degrees Centigrade. |
| Dimensions | 134 (W) x 87 (H) x 30 (D) mm |
| Weight | 190g NET, 260g, GROSS |
4 x GJD332 Mini Opal - External PIR Motion Sensor:
The Mini Opal is an inconspicuous, yet attractively styled 30-metre external passive infrared detector (also known as PIR Motion Sensor units) that works in conjunction with GJD’s security lighting controllers. This external GJD detector utilises a PIR Motion Sensor and sets new standards in outdoor movement detection and the intelligent control of security lights.
Cameras
Datasheet (mini_opal_lighting_kit.pdf, 694 Kb) [Download]
