VISONIC - OUTDOOR WIRELESS MIRROR DETECTOR (WITH ANTI-MASKING) COMPLETE KIT 2 - PM3020AM2

CODE: PM3020AM2

£439.99

In stock

COMMUNICATION MODULE OPTIONS

ADD ADDITIONAL KEYFOBS £20ea

ADD ADDITIONAL PIR SENSORS £36ea

ADD A KEYPAD £48

ADD ADDITIONAL PIRS £36ea

DUMMY SIREN (£15.00) OR LIVE SIREN (£84.00)

ADD FLASHING LED PACK FOR YOUR LIVE SIREN £14.99

Description

- Visonic PowerMax 30 Master alarm panel

- 2x TOWER-20AM External motion detector

- Optional wireless external Alarm

Product Description

This new kit from Map Security includes:

1 x Visonic PowerMax complete Control Panel - The VPCK1 comes with PSTN dialler as standard and can be fitted with an additional GSM module (choose from drop-down menu)

2x Visonic Outdoor Wireless TOWER-20AM MCW Detector with Anti-Masking

Build on this kit with additional components from the Visonic Powermax range to create a comprehensive protection system. Add an external wireless live siren for £80 with this kit!

Tower 20-AM Sensor Specifics

TOWER®-20AM MCW is a ground-breaking, anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes and free-roaming animals, while still providing reliable detection of real threats.

TOWER-20AM MCW features the revolutionary Octa-Quad™ technology which uses eight PIR sensors, as compared to only one sensor found in other outdoor detectors. Each sensor acts as a Quad detector to accurately determine whether an alarm is justified. In addition, to further increase reliability, TOWER-20AM MCW has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation, providing an exceptionally high resistance to vandalism and masking.

When used with Visonic’s PowerMax® advanced home security system*, the TOWER-20AM MCW wireless outdoor detector provides a complete solution for the protection of the house, inside and out.

TOWER-20AM MCW Features:
Superior outdoor detection with virtually no false alarms
Fully wireless, ideal for difficult installations
Innovative Octa-Quad technology accurately determines whether motion is legitimate, minimizing false alarms while ensuring the effective detection of real threats
Vandal-resistant design, enabled by patented V-Slot® technology, delivers unprecedented resistance to environmental interference and vandalism
Obsidian Black Mirror™ technology provides extremely high immunity to white light
Adaptive, active IR provides complete anti-masking protection (patented)
Patented, market-leading elliptical optics provide a longer detection range along with excellent detection sensitivity and false alarm immunity
12m x 12m (40ft x 40ft) / 90o coverage with true creep zone down looking optics
Installer-selectable, anti-masking setup can provide Trouble/Masking event notification without triggering an alarm to suit specific installation needs*
Compatible with all types of PowerMax panels and MCR receivers
Complies with international standards and certifications in Europe and USA, as well as IP55 rating

* When connected to PowerMax, PowerMax+ or MCR-308 receiver, turn ON the switch in order to send masking alerts to the control panel.

 
Visonic Panel Specifics:

  • Versatile communications capabilities:    
  • Built-in PSTN communicator.
  • Easy-to-add internal GSM/GPRS and/or IP* communications modules for maximum alarm reporting reliability to the central station and back-up for the standard PSTN lines.
  • Voice functionality option (at the manufacturing level): two-way voice communication, voice prompts and family message center.
  • Optional proximity reader enables rapid arming and disarming without the need for a keyfob.
  • Expander module for adding 1 PGM output, 2 additional hardwired zones, 1 wired siren output, and Speech Box interface.
  • Choice of external or internal (fully protected) power supply.
  • Two-way RF system with diversity antenna facilitates highly reliable radio communication.
  • Supports up to 3 partitions and multiple common areas (Optional).
  • Easy-view LCD display and icon-based keypad.
  • Back-up battery – supplies multiple peripherals and also backs up internal
    GSM/GPRS/IP modules.
  • Full compliance with most international standards and regulations, including: FCC, CE and EN50131 grade 2.

 

 

Visonic FAQ PageThis is a list of frequently asked questions on the the Visonic range of wireless alarm systems.

1) What is the coverage of a wireless device? Approx 100-120mtrs depending on the build of the house, if solid walls are in the path of the signal, this can be reduced by up to 30%, if extra range is needed use an extender MCX600.

2)Panel is saying CPU battery low? The panel comes with a minimum charge on the panel battery, when the unit is connected to the mains this will charge the battery.

3) How long do the batteries last? Approx 2-3 years, even longer in some cases, but all the batteries are monitored by the panel, with plenty of warning.

4) How do I clear alarm in memory – or clear the memory? Press the arm button on the remote, then the un-arm button.

5) The red light on the PIR is not picking me up when I walk past? The unit enters sleep mode when the unit is not used, to save battery life.

6) I have a Pet PIR but it is picking up my pet.... Check the mounting height, Pet PIRS should be mounted at about 6-8 Feet. Also set the Pulse count jumper inside the PIR to the lower sensitivity, ie 2 counts not 1 count.

7) I have a Pet PIR but it is picking up my pet, I’ve mounted it at 7 Feet and adjusted the pulse count? Where is the PIR installed? If installed in a hallway, most common answer is the Pir is picking up the stairs, so if the pet goes upstairs it will trigger the PIR. Angle if possible away from the stairs.Last resort, move the Pir, if the pet can access window ledges or sofa tops try the unit at 8 feet.

8) I don’t want to use a Battery Bell box, but I want a constant Power feed? You could use the Visonic Mains operated bell BUT a Better option is to use a Grade 3 bell Like Texecom Odessey. You can connect a wired bell from the panel, look on the website, open the description of the bell and open the PDF to see the wiring information.

9) I have a fault, but can’t find it? Set the panel in Normal mode, Press the star on the key fob, and a report will be announced.

10) How many key fobs can be enrolled with the panel? 8 can be enrolled.

11) How many Wireless Bell boxes can be installed? 2 can be enrolled.

12) I keep getting tamper alarm on the bell box when I am enrolling the system devices? The tamper plunger will be protruding from the back of the bell box, place a heavy book on the bell box, this will push it back in.

13) Is there a comfort LED or Alarm active indication on the bell box? No, We recommend the use of battery powered LED like ( ESLLED )

14) I keep getting tamper alarm on the bell box, after i’ve fitted it to the wall? The bell box should be mounted on a flat surface so the tamper plunger is pushed in. If on a spardash surface you will need to make a smooth surface where the plunger will touch the wall, but not too deep, or it won’t push back in to the bell box. There is an adjustment screw on the plunger which will extend the range. If this is not long enough try some cement over the Spardash.

15) Which PIR would you recommend for a conservatory? The best one to use would be Discovery Quad Mcw, as it has a four channel detector.

16) How many wired devices can I install? We only recommend 1 on each Zone, but if necessary you can loop door contacts, but they will all trigger the same zone.

17) How many wired Zones are there? There are 2 zones for wired devices, zones 29 and 30.

18) How many devices can I install on each zone? We only recommend 1 device on each zone.

19) How do I connect a phone line? Use 2 out of a 4 core telephone cable, 1 x core in the SET and 1 x core in the LINE, and connect directly to the back of a secondary phone socket with terminals 2 and 5, any polarity.

20) What if I have ADSL ? You will have to use a filter and connect it to the phone side of the filter.

21) I want to hardwire the phone line to an ADSL line? You can purchase a filter which can be mounted on the main BT socket, to change all the secondary sockets to phone only so you could hardwire into the back.

22) The Trouble light keeps coming on? Set the unit to Normal mode, press the star button on the key fob, the panel will announce the fault.

23) Can I connect remotely to the panel? Yes but you will need the panel connected to a phone line, and the Visonic software installed on your PC.

24) What can I do remotely? You can access all the functions of the panel remotely, from zone changing, event log, even pin number change.

25) I’m stuck, can I reset the panel? Yes if you go into function 12 in the installers menu, you have the option to reset to default.

26) Will the onboard dialler ring Mobiles as well as land lines? Yes it will.

27) Is there any settings to change the language? No, we only supply in English, but you can turn off the voice prompts.

28) Can I turn the speech off? Yes if you press No7 in ready mode.

30) Can I put a PIR in the bedroom? No, we don’t recommend putting a PIR in the bedroom, it could be set off too easily, for your own protection use a door-window contact.

31)In the event of losing mains power, what will happen to the panel if armed? The panel will still be armed, disarm in the normal way.

32) What is the voltage rating of the power supply? The power supply is rated at 220-240vac. Input voltage.

 

Cameras

N
N
N

There are currently no reviews for this product.

Type the characters you see in the picture above.

Loading...