Cart is empty
Product Description
Part number: 900-2B(100)AD-KT8
Solar Powered Wireless Perimeter Alarm & Auto Dialler System which have a 100 metre Detection Range between beams & 900 metre Transmission Range (between the Receiver & Detection Beams), very easy and fast to install, ideal for protecting Perimeters, Entrances, large Remote Buildings.
The Auto-Dialler can ring up to nine telephone numbers on two different triggers playing your own pre-recorded message, this is connected to the Wireless Receiver and your own telephone extension, it also has a built in siren.
These unique Perimeter Beams are very easy to install as they have a built in Red Glow Light (for easy lining up) which illuminates for just one hour after switching the beams on, after the hour this light will automatically switch off adding to your security.
The beams have two sets of built in dual detecting beams (60 mm apart) which need to be activated at the same time before the an alarm signal is sent back to the receiver, this reduces false alarms from small animals, leaves, debris etc.
This principle relates to either set of the dual detecting beams which results in a larger protected area. This latest version of Solar Beams have a port built into the rear of the Beams to allow occasional top up charging using a 12v transformer, ideal for locations where one or both of the Beams are perhaps not getting full daylight, especially in a low winters sun !!
The Wireless Four Channel Receiver, has an adjustable 12v DC output, 4 x Dry Relay Outputs, Adjustable Volume Control, options for a Reminder Beep and Exit Delay and has the ability to learn up to 32 sets of Beams into each channel (giving an amazing maximum number of beam sets of 128).
Kit Includes
1 x Set of Beams (2 Beams each)
1 x Receiver & Plug in Transformer
1 x Set of Brackets & Screws
1 x Auto-Dialler & Telephone Connectors
1 x Set of Manuals
Receiver Specification
Size: 160 (W) x 105 (H) x 35 (D) mm
Power Supply: 15v DC 1amp (plug in transformer)
ON/OFF Button: Yes
Adjustable Volume Control: Yes
Channels: 4
Max sets of Beams per Channel: 32
Output Voltage: 12 - 12v DC
Output Voltage Duration: 1 seconds to 5 minutes
Built in Chimes: Yes (one per channel)
Reminder Bleep: Yes (if programmed)
Exit Delay: Yes 5 minutes (if programmed)
Frequency: 434.6 MHz
Standby Current: 20 mA
Alarm Current: 180 mA
Relay Rating: 24v DC or 120v AC (2 amp)
Telephone Auto-Dialler Specification
Size: 200 (W) x 120 (H) x 45 (D) mm
Power Supply: 12v DC Transformer (supplied)
Trigger Method: Cable Connection to TB2 Receiver
Message Recording: Yes (10 seconds)
Back Up Battery: Yes
Built in 80 DB Siren: Yes (can be turned ON/OFF in programming)
Siren Duration: 1 - 99 minutes (adjustable)
Telephone Numbers it will call: 1 - 9 (adjustable)
Repeat Call Out Process: 5 times (if not turned off by keypad or telephone)
Programming Method: Built in keypad
Password Protected: Yes
Method for Remote Cancelling: * (stops telephone call and siren) # (stops telephone call & leaves Siren Activated)
Trigger Delay: 30 - 60 seconds (this is the delay between the trigger and telephone call)
Arming Delay: 30 - 60 seconds (this gives a delay for exit period)
Beam Specification
Size: 340 (H) x 123 (W) x 45 (D) mm
Power Supply: Re-chargeable AA Batteries
Mounting Methods: Wall or Pole
Detection Range: 100 metres
Transmission Range: 900 metres (line of sight)
Frequency: 433 Mhz
IP Rating: IP66
Distance Between Detection Beams: 60mm
Qty of Detecting Beams: 2 sets
Please Contact us for Friendly, No Obligation Advice !!
Perimeter Alarm Information.
'New' Solar Powered Wireless Perimeter Wireless Alarm Systems that have an impressive Detection Range of 100 metres and a Transmission range back to the receiver of 900 metres.
These Beams operate on the 'Active Beam' principle rather than the passive method, they consist of two beams which are actively always looking at each other, in the event of them not being able to see each other they will trigger and send a wireless signal back to the plug in Receiver or Solar Charger Siren.
There are two beams actively working, both of which need to be blocked before they activate, this reduces false alarms from small insects, birds and debris.
Suitable for protecting Building Sites, Farms & Farm Buildings, Gateways, Industrial & Domestic Buildings, Driveways and all types of Perimeter locations.
We have four different sizes of beams allowing you to choose one that suits your applications.
You can use over 100 sets of beams going back to any one receiver or multiple receivers against one or more sets of beams.
Product Information
The key features are:
1) Battery Powered.
2) Solar Charged (no cables needed).
3) Twin Detection Beams (to avoid false alarms).
4) Up to 100 metre easy Detection Range.
5) Upto 900 metres Wireless Transmission Range.
6) Options of Built in Sirens inside the Beams.
7) 4 Channel Receivers (can accept 32 sets of beams against each channel).
8) Output Relays on the Receiver.
9) You can add Auto-Dialers to the Receivers.
10) Very Affordable.
11) Quick & Easy to Install.
12) Move site to site.
If you want more information, please contact us.
Wireless Transmission Information
One of the key issues when purchasing a Wireless Driveway or Perimeter Alarm is choosing a system with wireless capabilities to suit your environment.
You will always see the term 'Line of Sight' next to the advertised Wireless Transmission range, therefore understanding this industry standard measurement will help you decide which system to purchase.
Still Confused !!
Then please contact us for friendly no obligation advice, we will always give you our honest opinion of what we feel is best for you.
Telephone: 01291 421111
Email: sales@map-security.com