900-3B(100)-KT11 SOLAR BEAM KIT
900-3B(100)-KT11 SOLAR BEAM KIT

900M - SOLAR POWERED WIRELESS PERIMETER KIT 3X DUAL BEAMS & 1X RECEIVER - 900-3B(100)-KT11

CODE: 900-3B(100)-KT11

£304.99

In stock

ADD RECHARGEABLE BATTERY MODULE £39.99

ADD SOLAR PIR SENSORS AS REQUIRED £29.99ea

ADD DOOR CONTACTS AS REQUIRED £23.99ea

ADD CURTAIN PIR SENSORS AS REQUIRED £29.99ea

ADD PANIC BUTTON AS REQUIRED

ADD KEYFOBS IF REQUIRED £16.99ea

ADD SMOKE DETECTOR AS REQUIRED £36.99

ADD EXTERNAL BELL AS REQUIRED (NOT SOLAR SIREN) £44.99

ADD WIRELESS SIGNAL BOOSTER AS REQUIRED £98.99ea

Description

Solar Powered Wireless Driveway Alert System with 3 Detector Beams & Reciever - KIT 11

3 Beams with Dual Detectors in each
100m detection range between Beams
900m Transmission range back to Receiver

 

 

 

Product Description

Part number: 900-3B(100)-KT11

Solar Powered Wireless Perimeter Alarm System which have a 100 metre Detection Range & 900 metre Transmission Range (between the Receiver & Detection Beams), very easy and fast to install, ideal for protecting Perimeters, Entrances, large Remote Buildings.

These unique Perimeter Beams are very easy to install as they have a built in Red Glow Light (for easy lining up) which illuminates for just one hour after switching the beams on, after the hour this light will automatically switches off adding to your security.

The Beams have three sets of Detection Beams set 220 mm apart, each Detection Beam comprises of two sensors set 60 mm apart from each other, both of these sensors need to be blocked to trigger the alarm, this prevents false alarms from insects, small animals and debris. This principle relates to all of the dual detecting beam sets which results in a larger protected area.  This latest version of Solar Beams have a port built into the rear of the Beams to allow occasional top up charging using a 12v transformer, ideal for locations where one or both of the Beams are perhaps not getting full daylight, especially in a low winters sun.

A Wireless Four Channel Receiver, has an adjustable 12v DC output, 4 x Dry Relay Outputs, Adjustable Volume Control, options for a Reminder Beep and Exit Delay and has the ability to learn up to 32 sets of Beams into each channel (giving an amazing maximum number of beam sets of 128).


Kit Includes
1 x Set of Beams (3 pairs of detection beams per set)
1 x Receiver & Plug in Transformer
1 x Set of Brackets & Screws
1 x Set of Manuals


Reciever Specification
Size: 160 (W) x 105 (H) x 35 (D) mm
Power Supply: 15v DC 1amp (plug in transformer)
ON/OFF Button: Yes
Adjustable Volume Control: Yes
Channels: 4
Max sets of Beams per Channel: 32
Output Voltage: 12 - 12v DC
Output Voltage Duration: 1 seconds to 5 minutes
Built in Chimes: Yes (one per channel)
Reminder Bleep: Yes (if programmed)
Exit Delay: Yes 5 minutes (if programmed)
Frequency: 434.6 MHz
Standby Current: 20 mA
Alarm Current: 180 mA
Relay Rating: 24v DC or 120v AC (2 amp)


Beam Specification
Size: 590 (H) x 123 (W) x 45 (D) mm
Power Supply: Re-chargeable AA Batteries
Mounting Methods: Wall or Pole
Detection Range: 100 metres
Transmission Range: 900 metres (line of sight)
Frequency: 433 Mhz
IP Rating: IP66
Distance Between Dual Detection Beams: 60mm
Protection Height: 250mm
Qty of Detection Beams: 3

 

Perimeter Alarm Information.

'New' Solar Powered Wireless Perimeter Wireless Alarm Systems that have an impressive Detection Range of 100 metres and a Transmission range back to the receiver of 900 metres.

These Beams operate on the 'Active Beam' principle rather than the passive method, they consist of two beams which are actively always looking at each other, in the event of them not being able to see each other they will trigger and send a wireless signal back to the plug in Receiver or Solar Charger Siren.

There are two beams actively working, both of which need to be blocked before they activate, this reduces false alarms from small insects, birds and debris.

Suitable for protecting Building Sites, Farms & Farm Buildings, Gateways, Industrial & Domestic Buildings, Driveways and all types of Perimeter locations.

We have four different sizes of beams allowing you to choose one that suits your applications.

You can use over 100 sets of beams going back to any one receiver or multiple receivers against one or more sets of beams.

Product Information

The key features are:
1) Battery Powered.
2) Solar Charged (no cables needed).
3) Twin Detection Beams (to avoid false alarms).
4) Up to 100 metre easy Detection Range.
5) Upto 900 metres Wireless Transmission Range.
6) Options of Built in Sirens inside the Beams.
7) 4 Channel Receivers (can accept 32 sets of beams against each channel).
8) Output Relays on the Receiver.
9) You can add Auto-Dialers to the Receivers.
10) Very Affordable.
11) Quick & Easy to Install.
12) Move site to site.

If you want more information, please contact us.

Wireless Transmission Information

One of the key issues when purchasing a Wireless Driveway or Perimeter Alarm is choosing a system with wireless capabilities to suit your environment.
You will always see the term 'Line of Sight' next to the advertised Wireless Transmission range, therefore understanding this industry standard measurement will help you decide which system to purchase.

Need Help?

Still Confused !!
Then please contact us for friendly no obligation advice, we will always give you our honest opinion of what we feel is best for you.
Telephone: 01291 421111
Email: sales@map-security.com

 

Cameras

N
N
N

Type the characters you see in the picture above.

Loading...